Back to Blog
How-to Guides 2026-11-20 Timeless Razor: Premium American-Made Safety Razors 0 views

How to Install and Adjust a Shaving Knot in an Adjustable Handle

How to Install and Adjust a Shaving Knot in an Adjustable Handle

Learn how to install, swap, and adjust a shaving knot in the TRBR adjustable brush handle without glue. Step-by-step guidance for knots 20 mm to 28 mm.

What Makes the TRBR Handle Different

Most brush handles require glue to hold the knot in place. The TRBR Adjustable Brush Handle from Timeless Razor eliminates that step. Its design uses a set of nine elastomer collets, each sized for a specific knot diameter from 20 mm to 28 mm. You twist the handle apart, choose the correct collet, insert your knot, and reassemble. No adhesive, no waiting, no mess.

What You Need Before You Start

The handle itself weighs 58 grams and is 60 mm tall with a 38 mm diameter. It is machined from solid 6061 T6 aluminum with a hard-coat anodized finish. Knots are sold separately. You will need a knot that fits within the 20 mm to 28 mm range. The handle comes with all nine collets, so you do not need to purchase additional parts.

Step-by-Step Installation

Follow these steps to install or swap a knot in the TRBR handle.

  1. 1. Twist the handle apart: Hold the top and bottom sections and twist in opposite directions. The handle separates into two pieces, giving you access to the collet and knot.
  2. 2. Remove the existing knot and collet: If a knot is already installed, lift it out along with its collet. The collet is a flexible ring that grips the knot. No tools are required.
  3. 3. Select the correct collet for your new knot: The nine collets are individually sized for diameters from 20 mm to 28 mm. Choose the collet that matches your knot's diameter. A snug fit is normal.
  4. 4. Insert the knot and collet into the handle: Place the collet around the base of the knot, then push both into the handle's top section. The elastomer material holds the knot securely without glue.
  5. 5. Reassemble the handle: Align the two sections and twist them together until they are snug. The O-ring at the bottom helps prevent water from seeping into the handle during rinsing.

Adjusting the Knot Later

One advantage of the glue-free design is that you can change knots whenever you want. Simply repeat the steps: twist the handle apart, remove the current knot and collet, and insert a different knot with its matching collet. The collets are built to last a lifetime, so you can swap knots repeatedly without wear.

TRBR Adjustable Brush Handle Specifications

What the Supplied Information Does Not Cover

The instructions do not specify how tightly the handle should be twisted together, nor do they give a recommended torque. Tighten until the two sections feel secure but do not force them. The O-ring is present to reduce water ingress, but the handle is not advertised as waterproof. If you submerge it, water may still enter. The return policy does not allow returns on knots, so choose your knot carefully before installation.

Related Articles

Customer Service
Home
Products
Cart
Profile